Power Factor Controller Measurement Accuracy Current +-1%

• Type: Power
• Structure: Protection
• Certification: ISO9001:2000, CCC
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: controller10
• Form: All- packaged Type
• Operation Voltage: Low Voltage
• Size: 1 Uint
• Application Range: Power Plants
• Shell Material: PVC
• Shell Protection Grade: IP56
• Brand: Huakun
• Rated Voltage: AC380/AC220V+-10%
• Rated Current: AC0-5A
• Rated Frequency: 50Hz+-5%
• Sensitivity: 100mA
• Switching Delay: 1-250s
• Transport Package: Carton Package
• Specification: 113*113mm
• Trademark: Huakun
• Origin: Shanghai, China
• Production Capacity: 100000PCS/Year
• Package Size: 15.00cm * 15.00cm * 8.70cm
• Package Gross Weight: 5.000kg

Product Description

HKK-JKW series of reactive power automatic compensation controller (referred to as controller) is a special equipmentfor low-voltage distribution system to compensate reactive power. It is designed according to the industry standard JB/T9663-2013 and the power standard DL/T597-1996. lts sampling physical quantity is reactive power, with novel design,many functions, good control performance, high reliability advantages, in the domestic similar products in a leadingposition, for distribution automation provides a new equipment.
1.Power supply voltage: rated at 220V or 380V, fluctuation shall not exceed ±10%;

2.Ambient temperature:-25°ºC~55C;

3.Relative humidity: The maximum relative temperature is 90%/(20°c ,4.Altitude: no more than 2000m; 5.Environmental conditions: no explosive inflammable dangerous media,no corrosive metal gases and conductive dustdamaging electrical insulation.
1.Basic parameters Rated voltage: AC380/AC220V±10%

Rated current ACO-5A Rated frequency: 50Hz±5%

2.Measurement accuracy

Voltage: ±1.0%; Current: ±1.0%;

Powerfactor: ±1.0%;

Reactive power:±2.0%.

3.Control parameters

Sensitivity:100mA Target Cos preset: 0.70-1.00; Step 0.01; Factory preset 0.95;

Switching delay: 1-250s; Overvoltage protection: 380-500/230-260v;Step 1 v.Back to the poor 6 V.

Undervoltage protection: 340V/180V; Back to the poor 6v. CT changes: 50/5A-4000/5A Step 1; Capacitance: 0-125kvar each branch factory preset 5Kvar;

Contact capacity: 380V*5A/220V*7A per branch.